|
Materials Services
- Failure analysis of the components, finding root cause and suggesting the remedial actions
- Chemical composition of metals, polymers, ceramics, glass, ores & pigments
- Trace and ultra trace elements determination (Up to ppb level)
- Physical properties : Macro & Microstructural observations, inclusion rating, grain size measurement, case depth / decarburization depth measurement etc.,
- Mechanical properties : Hardness, tensile, Impact, Bend & Microvicker’s hardness
- Identification of the unknown materials
- Environmental & Climatic testing – salt spray, accelerated aging tests, steam aging test, CASS test, stability tests
- Identification of the plating materials and thickness measurement
- Critical dimensional measurement of the engineering components
- Fractography studies by using SEM
- Spot chemistry determination by using XRF(>0.1mm area)
- Residual stress analysis by XRD
- Solder joint quality evolution
- Studies on weld joint, HAZ
- Ionic contamination of the PCB boards
- Restriction of Hazardous substances (RoHS) like hexavalent chromium, cadmium, mercury, lead, polybrominated Biphenyls (PBB), polybrominated diphenyl ether (PBDE) contents.
- BET surface area & average porosity analysis for the metal powders, carbon blocks, cosmetic powders, drug powders, silicondioxide, calcium carbonate powders etc.
- Substances of Very High Concern (SVHC) as per EC 1907/2006 and REACH basic requirement for registration
- Identification of polymer
- Density measurement
- Shore hardness analysis
- Accelerated aging test for migration studies
- Toxic metals & Additive metals quantification
- Filler content & Composition
- FTIR scan
- Restriction of Hazardous Substances (RoHS)
- Registration, Evaluation and Authorization of chemicals (REACH)
- Water absorption content
- Resistance to Oils
- Differential Scanning Calorimetry (DSC)
- Thermogravimetric Analysis (TGA)
- Phthalates estimation
- Poly Aromatic Hydrocarbons (PAH) determination
- Fatty acid content
- Halogens content
- Phenolic compounds determination
- Softening point determination for resins
- Nitrogen content determination
- Dioxins & Benzofurans analysis
- Failure analysis of polymers
- Chlorinated compounds analysis
- Banned amines estimation
Restriction of Hazardous Substances (RoHS)
- Lead (Pb)
- Cadmium (Cd)
- Mercury (Hg)
- Hexavalent Chromium (Cr+6)
- Isomers of Polybrominated Biphenyls (PBB)
- Isomers of Polybrominated Diphenyl Ether (PBDE)
- Lead (Pb)
- Cadmium (Cd)
- Mercury (Hg)
- Hexavalent Chromium (Cr+6)
- Registration, Evolution and Authorisation of Chemicals (REACH)
|
- Providing the basic inputs for the preregistration requirements
- Substances of Very High Concern (SVHC) or candidate list parameters certification
- Studying the toxic properties and labeling the materials accordingly
- Providing the Material Safety Data Sheet (MSDS) and Chemical Safety Report (CSR)
- Analysing the following substances as per EC 1907/2006 regulation
- Estimation of extractable heavy metals
- Phthalates
- Dioxins & Furans
- Poly Aromatic Hydrocarbons (PAH)
- Flame retardants
- Chlorinated compounds
- Banned amines
- Ozone depleting substances
- Lead, cadmium, Nickel, Mercury, Hexavalent chromium etc.
- Pigments, Dyes and colorants
|
- Heavy metals as per EN 71, AP (89)1, JOSHPA, BFR IX, ASTM F963, etc.
- Poly chlorinated Biphenyls (PCB)
- RoHS
- Primary aromatic amines
- Dioxins & Furans
- Hexa chloro Benzene (HCB)
- Phthalates
- Poly aromatic Hydrocarbons (PAH)
- Halogens
- APEO & NPEO
- Substances of very high concern (SVHC)
- Heavy metals
- Lead
- SVHC
- EC 1907/2006 requirements
- Banned metals and flame retardants as per RoHS & WEEE directives
- Composition of the solder joints, lead free solders
- Ionic contamination of the PCB boards
- Solder joint quality evolution
|
|
|
|
|
